Voici une toute nouvelle version de Smartphoton

[Tapion]

Bonjour,
utilisateur de smartphoton qui fonctionne bien, 
j'ai installé Smart Voltonic : je n'ai aucune info qui ressort, tous les capteurs sont indisponibles.
Voici ma config. :

inv1_protocol: voltronic
inv1_link: serial
inv1_serial_port: >-
  /dev/serial/by-id/usb-Prolific_Technology_Inc._ATEN_USB_to_Serial_Bridge-if00-port0
inv1_gateway_host: 192.168.1.24
inv1_gateway_port: 1883
inv1_display_mode: modern
inv1_output_priority_2choices: false
inv2_protocol: voltronic
inv2_link: serial
inv2_serial_port: /dev/serial/by-id/CHANGE-ME-2
inv2_gateway_host: ""
inv2_gateway_port: 8899
inv2_display_mode: modern
inv2_output_priority_2choices: false
inv3_protocol: voltronic
inv3_link: serial
inv3_serial_port: /dev/serial/by-id/CHANGE-ME-3
inv3_gateway_host: ""
inv3_gateway_port: 8899
inv3_display_mode: modern
inv3_output_priority_2choices: false
battery_section: ────────── BATTERY ──────────
battery_system_voltage: 48V
mqtt_section: ────────── MQTT CONFIGURATION ──────────
mqtt_host: mqtt
mqtt_port: 1883
mqtt_user: ghis
mqtt_pass: xx
premium_section: ────────── PREMIUM ──────────
premium_key: ""
inv1_battery_capacity_ah: 0
inv1_battery_total_capacity_kwh: 0
inv2_battery_capacity_ah: 0
inv2_battery_total_capacity_kwh: 0
inv3_battery_capacity_ah: 0
inv3_battery_total_capacity_kwh: 0
dashboard_section: ────────── DASHBOARD ──────────
dashboard_output: lovelace
dashboard_custom_cards_installed: false
dashboard_language: fr
send_bip: false
timezone_section: ────────── TIMEZONE ──────────
timezone_mode: Europe/Paris
timezone_custom: UTC


Que puis-je faire ? 
Merci de votre aide

Salut dans tes logs je vois que tu as configurer un serial et un gateway essaie déjà de laisser juste en serial , si pas d'amélioration envoie moi un mp ont verra comment ont peut faire